This entry was posted on December 29, 2011, 8:25 am and is filed under Auto Car Design. You can follow any responses to this entry through RSS 2.0.
You can leave a response, or trackback from your own site.
#2 by goldhuntertim on December 29, 2011 - 9:38 am
it took some time but i figured it out-the trick is to get the trigger just right size then build around it once that is done and you like the size the ohter trick is the trigger pivets on the dowel so the trigger isn’t really being pulled straight back it’s going back and upwards a little look about the middle of handle you’ll see the space i’m talking about. It looks to be 1/4 in. ply and maybe some pine some other nice exoctic wood now i’m going to try to make one my self
#4 by Verradonairun on December 29, 2011 - 10:42 am
@Pedrolff
Try looking at it some more. I’m sure you’ll figure it out on your own. (Hint: the trigger is one with the “staircase” that you see in the video. The “stairs”, when trigger is squeezed, should pertrude (at a slight angle) a bit above the points which support the stretched bands)
@oggcraft I find your work to be both ingenius and fascinating. What was your inspiration for this? And I understand your reluctance to allow all your hard work to be copied for no gain; my advice to you is to turn this into a profit maker by copyrighting the designs and selling the kits or else leasing the design rights out to people who will make and sell them. You can make a bundle of money either way on these designs. Good luck to you sir!
#18 by 1TopGunPaintballer on December 29, 2011 - 5:41 pm
Clever design. You were the 2nd person to motivate me on making Rubber Band Guns as hobby. I 1st started out with Knex, then I looked RRB guns and found this. are you not able to get a patent, or have you tried? And someone else did before you came up with these? I came up with a similar design from the sliding handle.
Have you ever thought of selling your products, the guns would easily make a profit. Also if you start making plans for you guns, you may be able to sell them on your website, with copy right attached to them. Think About It!
You should really think about making this a business, and mass producing your products. Start making plans, then make them available to purchased online with copyright and patten. You could make loads.
#1 by Zarrok1138 on December 29, 2011 - 8:42 am
@oggcraft why not just sell them
#2 by goldhuntertim on December 29, 2011 - 9:38 am
it took some time but i figured it out-the trick is to get the trigger just right size then build around it once that is done and you like the size the ohter trick is the trigger pivets on the dowel so the trigger isn’t really being pulled straight back it’s going back and upwards a little look about the middle of handle you’ll see the space i’m talking about. It looks to be 1/4 in. ply and maybe some pine some other nice exoctic wood now i’m going to try to make one my self
#3 by aicewei on December 29, 2011 - 9:53 am
wowowo soo smart omg
#4 by Verradonairun on December 29, 2011 - 10:42 am
@Pedrolff
Try looking at it some more. I’m sure you’ll figure it out on your own. (Hint: the trigger is one with the “staircase” that you see in the video. The “stairs”, when trigger is squeezed, should pertrude (at a slight angle) a bit above the points which support the stretched bands)
#5 by wuiyang on December 29, 2011 - 11:02 am
now i know how to do it if you show how to let rubber go up, thx
#6 by hahahaha020202 on December 29, 2011 - 11:54 am
this is a cool sample of Rubber Band Gun /OGG CRAFT ,best ever!!!!!!
#7 by J3ubbles on December 29, 2011 - 12:14 pm
i think my dad making one fo rme after a showed him this ty ty ty oggcraft
#8 by axenome on December 29, 2011 - 12:55 pm
@oggcraft I find your work to be both ingenius and fascinating. What was your inspiration for this? And I understand your reluctance to allow all your hard work to be copied for no gain; my advice to you is to turn this into a profit maker by copyrighting the designs and selling the kits or else leasing the design rights out to people who will make and sell them. You can make a bundle of money either way on these designs. Good luck to you sir!
#9 by cristomnick on December 29, 2011 - 12:56 pm
@benzxor it are only pics
#10 by benzxor on December 29, 2011 - 1:46 pm
There’s a link under the video box
#11 by MsLinkisawesome on December 29, 2011 - 1:48 pm
where can i get them?
#12 by vegahe96 on December 29, 2011 - 1:59 pm
1) Hold your breath.
2) Copy all of these steps.
3) Go to two other video.
4) Paste it in the comments.
If you can do all of this without breathing you’re a god
#13 by 1Abdilatif1 on December 29, 2011 - 2:56 pm
1) Hold your breath.
2) Copy all of these steps.
3) Go to two other video.
4) Paste it in the comments.
If you can do all of this without breathing you’re a god
#14 by mrbling333 on December 29, 2011 - 3:35 pm
Where can u get em?
#15 by FlamingSilencer on December 29, 2011 - 3:55 pm
Make sure to copyright these before you decide to sell them or the plans for them. =^)
#16 by 3mpir on December 29, 2011 - 4:15 pm
did i just see smoke at 0:46 this thing has power!!!!
#17 by remotecontrolaholic on December 29, 2011 - 5:01 pm
youbshould sell plans for them, then you would be able to share this technology whilst still making money from each one!
#18 by 1TopGunPaintballer on December 29, 2011 - 5:41 pm
Clever design. You were the 2nd person to motivate me on making Rubber Band Guns as hobby. I 1st started out with Knex, then I looked RRB guns and found this. are you not able to get a patent, or have you tried? And someone else did before you came up with these? I came up with a similar design from the sliding handle.
#19 by MrGatte123 on December 29, 2011 - 5:44 pm
Can’t continue like this anymore. You really need to get laid. Look at dating.com.
#20 by khainguyen98 on December 29, 2011 - 5:46 pm
i wish i had a gun making hobby. i cant even saw strait lol.
#21 by jetstream1022 on December 29, 2011 - 5:59 pm
tese gun are cool do you sell them, or do you just keep them
#22 by brutusrox on December 29, 2011 - 6:22 pm
genius now all rubber bands get the same power… nice!
#23 by TheDobbo345 on December 29, 2011 - 6:28 pm
Have you ever thought of selling your products, the guns would easily make a profit. Also if you start making plans for you guns, you may be able to sell them on your website, with copy right attached to them. Think About It!
#24 by TheDobbo345 on December 29, 2011 - 6:40 pm
You should really think about making this a business, and mass producing your products. Start making plans, then make them available to purchased online with copyright and patten. You could make loads.
#25 by oggcraft on December 29, 2011 - 6:56 pm
thanks